Liquid Ring Vacuum Pump
2BW Liquid Ring Vacuum Package
Complete vacuum complex on the common frame: pump, engine, air-water separator, coolant and pipe.
2BW4 Liquid Ring Vacuum Pump
2BW4 series liquid ring vacuum pump, compact design, reaching depth vacuum, continuous operation stable.
2BWX Tandem Compressor Package
The two consecutive (tandem) compression complex uses liquid ring pumps, reaching a higher discharge pressure…
YS Vacuum Priming Device
Vacuum prey equipment for large centrifugal pump and siphon pipeline; fast prey, automatic operation.
2BE1 Liquid Ring Vacuum Pump
The 2BE1 liquid ring vacuum pump has achieved ATEX certification for explosive gases and chemical processes.
CBE2 Two-Stage Liquid Ring Vacuum Pump
Two-tier pump, reaching a deeper vacuum than a one-tier pump without an auxiliary ejector.
CDF Liquid Ring Vacuum Pump
CDF series liquid ring vacuum pump, compact texture, suitable for pharmaceutical, food and light industry.
CBF Liquid Ring Vacuum Pump
CBF series liquid ring vacuum pump, wide flow range, commonly used in chemicals, paper and electric power.
SK(2YK) Liquid Ring Vacuum Pump
SK/2YK liquid ring vacuum pump, solid pump body, continuous work response.
The Kenflo water ring vacuum pump (liquid ring vacuum pump) consists of the CBF, 2BE1, CDF, CBE2 two-tier, SK(2YK), a complete set of 2BW, 2BW4, 2BWX and YS vacuum cap equipment. The pump is resistant to moist, dirty and flammable gases, suitable for air suction, vacuum distillation, vacuum filtration, centrifugal pump cap and gas recovery.
Advantages of Kenflo fluid vacuum pump.
- Over 20 years of applied research.pump and vacuum system without liquid circles.
- A wide range of products:CBF, 2BE1, CDF, CBE2, SK/2YK, together with the 2BW/2BW4/2BW9 complex and the YS vacuum plumber equipment.
- It is safe:Treat flammable, explosive and toxic gases; obtain CE, ATEX certification.
- against the corrosion:SS304/304L/316L, double-phase steel, titanium alloy, Hastelloy.
- Energy saving, low noise, easy maintenance;Consume less water due to closed week.
The primary number.
- Suction pressure: 25 ~ 1,013 mbar(A); maximum vacuum pressure up to 25 mbar(A)
- Flow: 0.4 to 1.600 m3/min
- Working material: water (week closed, with heat exchanger)
- Material: carbon steel + gang, SS304/304L/316L, double phase, titanium, Hastelloy
- Application: chemicals, pharmaceuticals, power plant condensation, oil refining, oxide gas recovery, special gas transportation
Need help choosing equipment?
Contact us